Sharpening Your Flexcut Tools

To strop gouges, chisels, and V-tools, hold the tool at a constant angle, apply pressure and pull the tool across the leather. The bevel is held at a constant angle, pressure is applied, and the tool is pulled across the leather away from the cutting edge. ​​Keeping your tool sharp is another important part of maintenance since a dull blade won’t make clean cuts. Use a sharpening stone if your tools are particularly dull, but a strop should work well for regular sharpening. You should also use a honing guide when you sharpen chisels to accurately set the angle of the blade.

Fortunately, with the right strategies for how to sharpen wood carving tools, you can easily keep your tools functioning at their optimal levels long term. Here’s a rundown on the top tips for sharpening wood carving tools. We also have resources about general tool sharpening or more on sharpening tool edges. For many people stropping is the final stage of sharpening wood carving tools. It is done to remove the leftover burr after the honing process by using a leather strop. The leather strap has two sides; one is made of smooth hide, and the other is made of rough leather.

I tell my students to treat sharpening as an art in itself. To use a sharpening stone, you’ll first want to get your stone wet to ensure smooth gliding. Then, hold your blade against the stone at an angle , making sure that the cutting edge is facing down. Afterward, move your blade so that it is at a smaller angle to your stone . We recommend that you select a sharpening stone that uses water instead of oil as its lubricant. Oil can lead to unwanted stains on the project and your clothes.

A rounded bevel makes the tool roll out of the cut prematurely. Why do you need different bevels for different woods? The shallower the bevel, the easier the tool slides through the wood. wood fence sliding gate Guaranteed and/or Quality-Inspected – Find tools that have been inspected for quality or offer a money back guarantee if any items arrive damaged or do not meet your standards.

Honing refers to the process of maintaining a sharp cutting edge. In this process, the cutting edge of whatever carving tool you intend on using is stropped to remove scratches or burr that may remain after the sharpening process. For a V-tool, try a charged leather shoelace to remove the burr.

When the tool begins to feel as if it’s dragging through a cut, the tool should be stropped a number of times until the sharpness is restored. Lora Irish packs a wealth of information into this slender book. Sharp tools are essential to good woodworking, so knowing how to sharpen your tools is an essential woodworking skill.

Comments are closed.